ultimate tensile strength sentence in Hindi
Sentences
Mobile
- Ultimate tensile strength is the tensile stress at which the bolt fails.
- The stress at the point of complete breakage is called a material s ultimate tensile strength.
- Where UTS is the ultimate tensile strength in ksi and h is the strip thickness in inches.
- The ultimate tensile strength of steel sheets in the sections has little direct relationship to the design of those members.
- Once the material has reached its ultimate tensile strength it will elongate more easily until it reaches ultimate failure and breaks.
- Because of the difference in ultimate tensile strength between armor steel and hull steel, severe stresses on the hull were expected.
- A 588 has a yield strength of at least, and ultimate tensile strength of for all rolled shapes and plate thicknesses up to thick.
- The original A 242 alloy has a yield strength of and ultimate tensile strength of for light-medium rolled shapes and plates up to thick.
- As per different standards of indented prestressting steel wires, it is seen that as the diameter of wire increases Ultimate Tensile Strength ( UTS ) decreases.
- The factor of safety on ultimate tensile strength is to prevent sudden fracture and collapse, which would result in greater economic loss and possible loss of life.
- Intermediate annealings may be required to reach the required ductility to continue cold working a workpiece, otherwise it may fracture if the ultimate tensile strength is exceeded.
- Plates from have yield strength at least and ultimate tensile strength at least, and plates from thick have yield strength at least and ultimate tensile strength at least.
- Plates from have yield strength at least and ultimate tensile strength at least, and plates from thick have yield strength at least and ultimate tensile strength at least.
- The exceptions are bolted and welded connections, the strength of which depends not only on the yield point but also on the ultimate tensile strength of the material.
- The reversal point is the maximum stress on the engineering stress strain curve, and the engineering stress coordinate of this point is the ultimate tensile strength, given by point 1.
- The first property listed, the ultimate tensile strength of 4.6 MPa, is slightly larger than the accepted tensile strength of standard fiber-reinforced concretes, ( 4.3 MPa ).
- Its minimum room temperature mechanical property requirements are 109, 000 psi ( ultimate tensile strength ), 80, 000 psi ( 0.2 % offset yield strength ) and 25 % minimum elongation.
- It has a Young's modulus of approximately 530 700 GPa, It has an ultimate tensile strength of 344 MPa, an ultimate compression strength of about 2.7 GPa and a Poisson's ratio of 0.31.
- This is because the material used in this application is typically very strong ( e . g ., 3000 MPa ultimate tensile strength, more than 10 times mild steel ) but not particularly stiff ( 150 to 250 GPa, a little less than steel, is typical ).
- Where " k " is a factor taking into account several parameters including friction . " T " is the ultimate tensile strength of the metal . " L " and " t " are the length and thickness of the sheet metal, respectively.
- More Sentences: 1 2
ultimate tensile strength sentences in Hindi. What are the example sentences for ultimate tensile strength? ultimate tensile strength English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.